Categories

Showing 1-12 of 225 item(s)

Accentronix Fixed Micro Receiver Nice

Accentronix Fixed Micro Receiver Nice

Power: 5-30VDC 40mA Unit is used to link Accentronix Nano/ Nano Plus to the Nice wireless keypad (LK12-3 or LK12-5) Unit can also be used on the Infiity Cell Switch same as the with Nano & Nano Plus devices. Compact design. 40mm x 34mm x 19mm 1x FET outputs total 400mA

Part No:SW43-9

DACE 2Button Transmitter TM002

DACE 2Button Transmitter TM002

Frequency: 433mHz Battery: 23A 12V (BA27) Coding: D.A.C.E Rolling Code

Part No:SW140-1

DACE 4Button Transmitter TM004

DACE 4Button Transmitter TM004

Frequency: 433mHz Battery: 23A 12V (BA27) Coding: D.A.C.E Rolling Code

Part No:SW143

DACE LUX DC12 GDO - Roll Up Motor Kit

DACE LUX DC12 GDO - Roll Up Motor Kit

220VDC Power input - 12V DC motor (100W) Encoder limit setup - no hard limits Ultra Slim Motor Roll Head (65mm wide) 8m² size doors Max. Lift Load = 180N On Board Receiver = 64x remotes

Part No:GA129

Special Order

DACE RDO LUX DC12 Controller Only

DACE RDO LUX DC12 Controller Only

Part No:GA129-1

Special Order

DACE RDO LUX DC12 Drum Motor Only

DACE RDO LUX DC12 Drum Motor Only

Slim line design (65mm wide) 100W power rating 8,5A max current

Part No:GA129-2

Special Order

DACE Receiver EXO-7

DACE Receiver EXO-7

Frequency: 403 & 433mHz Contacts: N/O or N/C relay output Voltage: 12-24V DC/AC Memory: 630 Remotes. Mode: Pulse or latch

Part No:SW142-1

Special Order

ET Tranceiver 404MHz 40Bit

ET Tranceiver 404MHz 40Bit

Part No:SW66-2

Garage Door Operator DC Blue Absolute Roll-Up Full Kit 2xTX4 Batt CW

Garage Door Operator DC Blue Absolute Roll-Up Full Kit 2xTX4 Batt CW

Input voltage (Standard kit option) 220VAC, 50Hz Primary supply to the electric motor: 24V Toroidal transformer Encouder Limit Setup Lithium Ready Applicable door types: One-piece Aluzinc or Cromadek roll-up doors 8m² Door size Roll Up Doors

Part No:GA161

MTQ Gemini 1 Button Tx Code Hop 433Mhz

Gemini 1 Button Tx Code Hop 433Mhz

Gemini MTQ 433Mhz Code hopping 1 button 27g 70×35x15 mm

Part No:SW23

Gemini 12V DC Slider PCB LSE R02615 Dos

Gemini 12V DC Slider PCB LSE R02615 Dos

12vDC Fitted to developing type DC Sliding gate operators with LIMITED SHAF Manufactured between 2007 and 2008 Not compatible with the older or newer version gate operators

Part No:GA85-4

Gemini 12V DC Slider PCB SEL P02455

Gemini 12V DC Slider PCB SEL L90451

12vDC Fitted to the latest Sliding gate operators with SHAFT ENCODING capab To learn the position of the gate from 2008 onwards This PC Board is not compatible with the older version gate operators On-board receiver incorporated onto the PC board Connections for accessories

Part No:GA85-3