Categories

Showing 1-12 of 71 item(s)

DACE 2Button Transmitter TM002

DACE 2Button Transmitter TM002

Frequency: 433mHz Battery: 23A 12V (BA27) Coding: D.A.C.E Rolling Code

Part No:SW140-1

DACE 4Button Transmitter TM004

DACE 4Button Transmitter TM004

Frequency: 433mHz Battery: 23A 12V (BA27) Coding: D.A.C.E Rolling Code

Part No:SW143

DACE LUX DC12 GDO - Roll Up Motor Kit

DACE LUX DC12 GDO - Roll Up Motor Kit

220VDC Power input - 12V DC motor (100W) Encoder limit setup - no hard limits Ultra Slim Motor Roll Head (65mm wide) 8m size doors Max. Lift Load 180N On Board Receiver 64x remotes

Part No:GA129

Special Order

DACE RDO LUX DC12 Controller Only

DACE RDO LUX DC12 Controller Only

Part No:GA129-1

Special Order

DACE RDO LUX DC12 Drum Motor Only

DACE RDO LUX DC12 Drum Motor Only

Slim line design (65mm wide) 100W power rating 8 5A max current

Part No:GA129-2

Special Order

DACE Receiver EXO-7

DACE Receiver EXO-7

Frequency: 403 & 433mHz Contacts: N/O or N/C relay output Voltage: 12-24V DC/AC Memory: 630 Remotes. Mode: Pulse or latch

Part No:SW142-1

Special Order

Robo Guard 4 Channel Universal Transmitter

RoboGuard 4 Channel Universal Transmitter

Each universal transmitter has four inputs that can be wired in from t The universal transmitter will monitor these inputs (alarm outputs fr The Universal transmitter can also be configured to emulate the Robog The Universal transmitter can be configured as a repeater station wit In this configuration the transmitter will transmit any received robo

Part No:BD309

Robo Guard Alarm Interface

RoboGuard Alarm Interface

The alarm interface supervises and monitors up to 4 ROBOGUARD PIR s Intruder tamper and status LED s 6 Relay outputs (N/O and N/C) Autotest (every 20 minutes) Dimensions: 170 x 95 x 29 mm Weight: 180g Current consumption: 10 mA Power supply: 12VDC Compatible with most alarm panels

Part No:BD313

Robo Guard Ball Bracket

RoboGuard Ball Bracket

Roboguard Aluminum mounting bracket Allows the installer to swivel the Roboguard Can be mounted to any surface and the beam can turn 180 degrees

Part No:BD312

Robo Guard Charger 220V

RoboGuard Charger 220V

2 Pin AC/DC Adaptor charger with lead and DC jack 220VAC-0.3Amps input 16VDC-250mA output

Part No:BD317

Robo Guard HQ 8 Zone ONLY EXCL Charger and Alarm Cable

RoboGuard HQ 8 Zone ONLY EXCL Charger and Alarm Cable

8 zone with individual intruder detection Tamper detect and supervision LED s together with audible warning s 5 onboard outputs rated at 1A and 4 low current outputs rated at 40mA Remote arming disarming including panic NiMH 6v battery with the on board UHF receiver and resident speaker t

Part No:BD304-1

Robo Guard Installers Manual One Sided

RoboGuard Installers Manual One Sided

Roboguard Technical Manual 44 pages

Part No:BD300-IM