Categories

Showing 1-12 of 41 item(s)

1 to 3 MC4 Y-Branch Connectors (Per Pair)

1 to 3 MC4 Y-Branch Connectors (Per Pair)

(1 to 3) MC4 Solar Panel Branch Cable Connectors: 1 male to 3 female(M Rated Voltage (V): 1000VDC Rated Current (A):30A Contact material: Copper, tin-plated Degree of protection: IP67

Part No:CN19-6

Battery Lithium 25.6V 100AH Rack 3U LiFePO4

Battery Lithium 25.6V 100AH Rack 3U LiFePO4

Nominal Voltage: 25.6V (24V System) Nominal Capacity: 100AH (2560Wh) Cycle Life @80%DOD: 3000 Enclosure Protection: IP54 Continuous Charge Rate: 20A (0.2C) Max Charge Rate: 50A (not for daily cycle) Case Material: Metal Case Dimensions (L*W*H）: 360x482x130mm (3U)

Part No:BA51-12

Battery Lithium 25.6V 50AH Rack 2U LiFePO4

Battery Lithium 25.6V 50AH Rack 2U LiFePO4

Nominal Voltage: 25.6V (24V System) Nominal Capacity: 50AH (1280Wh) Cycle Life @80%DOD: 3000 Enclosure Protection: IP54 Continuous Charge Rate: 10A (0.2C) Max Charge Rate: 25A (not for daily cycle) Case Material: Metal Case Dimensions (L*W*H）: 360x482x86mm (2U)

Part No:BA51-9

DISRUPTER VALARM Vibration Detection Module

DISRUPTER VALARM Vibration Detection Module

Can be used in standalone mode or integrated with an existing security Easy installation and setup Adjustable sensitivity Status LED indicating system condition Operating voltage: 10-15V Standby Current

Part No:SW501

MC4 2 Way Y-branch connector with cable (pair)

MC4 2 Way Y-branch connector with cable (pair)

Rating Current 20A-30A Pin dimension:4.0mm

Part No:CN19-7

MC4 Solar Cable Connector Pair

MC4 Solar Cable Connector Pair

Solar MC4 connectors 30A rated current

Part No:CN19-5-1

Robo Guard 4 Channel Universal Transmitter

RoboGuard 4 Channel Universal Transmitter

Each universal transmitter has four inputs that can be wired in from t The universal transmitter will monitor these inputs (alarm outputs fr The Universal transmitter can also be configured to emulate the Robog The Universal transmitter can be configured as a repeater station wit In this configuration the transmitter will transmit any received robo

Part No:BD309

Robo Guard Alarm Interface

RoboGuard Alarm Interface

The alarm interface supervises and monitors up to 4 ROBOGUARD PIR’s Intruder tamper and status LED’s 6 Relay outputs (N/O and N/C) Autotest (every 20 minutes) Dimensions: 170 x 95 x 29 mm Weight: 180g Current consumption: 10 mA Power supply: 12VDC Compatible with most alarm panels

Part No:BD313

Robo Guard Ball Bracket

RoboGuard Ball Bracket

Roboguard Aluminum mounting bracket Allows the installer to swivel the Roboguard Can be mounted to any surface and the beam can turn 180 degrees

Part No:BD312

Robo Guard Charger 220V

RoboGuard Charger 220V

2 Pin AC/DC Adaptor charger with lead and DC jack 220VAC-0.3Amps input 16VDC-250mA output

Part No:BD317

Robo Guard HQ 8 Zone ONLY EXCL Charger and Alarm Cable

RoboGuard HQ 8 Zone ONLY EXCL Charger and Alarm Cable

8 zone with individual intruder detection Tamper detect and supervision LED’s together with audible warning s 5 onboard outputs rated at 1A and 4 low current outputs rated at 40mA Remote arming disarming including panic NiMH 6v battery with the on board UHF receiver and resident speaker t

Part No:BD304-1

Robo Guard Installers Manual One Sided

RoboGuard Installers Manual One Sided

Roboguard Technical Manual 44 pages

Part No:BD300-IM