Categories

Showing 1-12 of 87 item(s)

Accentronix Fixed Micro Receiver Nice

Accentronix Fixed Micro Receiver Nice

Power: 5-30VDC 40mA Unit is used to link Accentronix Nano/ Nano Plus to the Nice wireless keypad (LK12-3 or LK12-5) Unit can also be used on the Infiity Cell Switch same as the with Nano & Nano Plus devices. Compact design. 40mm x 34mm x 19mm 1x FET outputs total 400mA

Part No:SW43-9

Accentronix Micro Nova Receiver (RX1)

Accentronix Nove Compatible 1ch Receiver 12/24VDC Power input Device to be used with Nano/Nano+ or Infinity Switch Device to be used with whole range of Intercoms Compatible remotes: SW58-1/ SW58-2/SW58-4/ Compatible remotes: SW107-19/SW107-20/SW107-21/SW107-22

Part No:SW43-8

Cable Silicon 1.5mm Red / 100m - Ground Loop

Cable Silicon 1.5mm Red / 100m - Ground Loop

Flexible copper class 5 CEI EN 60228 Silicone rubber 1.5mm 100meters Used for gate exit loops

Part No:CB64

CAT5E Double Wall Box

CAT5E Double Wall Box

Cat5E wall box - Double

Part No:CN15-1

CAT5E Single Wall Box

CAT5E Single Wall Box

Cat5E wall box - Single

Part No:CN15

CAT6 Double Wall Box

CAT6 Double Wall Box

Cat6 wall box - Double

Part No:CN15-3

CAT6 Single Wall Box

CAT6 Single Wall Box

Cat6 wall box - Single

Part No:CN15-2

Centurion Barriers Claws Spike 3.0m Length Direct Drive Surface Mount

Centurion Barriers Claws Spike 3.0m Length Direct Drive Surface Mount

Mounts above road surface Uses standard SECTOR controller and gearbox allowing for reduced spare Anti-corrosion chassis - hot dip galvanized mild steel 85mm Mild steel, electroplated and powder coated spikes All moving parts are removable for easy maintenance Direct Drive Surface Mount

Part No:GA123

Special Order

Centurion Barriers Claws Spike 4.5m Length Direct Drive Surface Mount

Centurion Barriers Claws Spike 4.5m Length Direct Drive Surface Mount

Mounts above road surface Uses standard SECTOR controller and gearbox allowing for reduced spare Anti-corrosion chassis - hot dip galvanized mild steel 85mm Mild steel, electroplated and powder coated spikes All moving parts are removable for easy maintenance Direct Drive Surface Mount

Part No:GA123-1

Special Order

Centurion Barriers Claws Spike Gen Kit Direct Drive Surface Mount

Centurion Barriers Claws Spike Gen Kit Direct Drive Surface Mount

CLAWS Spike Gen Kit Direct Drive Surface Mount

Part No:GA123-4

Special Order

Centurion Barriers Claws Spike System 3.0m Direct Drive Flush Mount

Centurion Barriers Claws Spike System 3.0m Direct Drive Flush Mount

Mounts flush with road surface Uses standard SECTOR controller and gearbox allowing for reduced spare Anti-corrosion chassis - hot dip galvanized mild steel 85mm Mild steel, electroplated and powder coated spikes All moving parts are removable for easy maintenance Direct Drive Flush Mount

Part No:GA122

Special Order

CLAWS Spike System 3m length Independent Drive Flush Mount

Centurion Barriers Claws Spike System 3.0m Indep Drive Flushmount

Mounts flush with road surface 12V DC Input voltage Anti-corrosion chassis - hot dip galvanized mild steel 85mm Mild steel, electroplated and powder coated spikes On-board receiver Supports output for robot interface All moving parts are removable for easy maintenance High-torque DC motor for greater reliability and responsive operation External limit switches provide a failsafe operation Independent Drive Flush Mount

Part No:GA120

Special Order