Categories

Showing 1-12 of 45 item(s)

Accentronix Fixed Micro Receiver Nice

Accentronix Fixed Micro Receiver Nice

Power: 5-30VDC 40mA Unit is used to link Accentronix Nano/ Nano Plus to the Nice wireless keypad (LK12-3 or LK12-5) Unit can also be used on the Infiity Cell Switch same as the with Nano & Nano Plus devices. Compact design. 40mm x 34mm x 19mm 1x FET outputs total 400mA

Part No:SW43-9

Accentronix Micro Nova Receiver (RX1)

Accentronix Nove Compatible 1ch Receiver 12/24VDC Power input Device to be used with Nano/Nano+ or Infinity Switch Device to be used with whole range of Intercoms Compatible remotes: SW58-1/ SW58-2/SW58-4/ Compatible remotes: SW107-19/SW107-20/SW107-21/SW107-22

Part No:SW43-8

Nova - 1 Channel Receiver 433 MHz

Centurion Nova - 1 Channel Receiver 433 MHz

Nova - 1 Channel Receiver (433MHz)

Part No:SW46-2

Nova - 2 Channel Receiver 433 MHz

Centurion Nova - 2 Channel Receiver 433 MHz

Nova - 2 Channel Receiver (433MHz)

Part No:SW46-3

Nova - 4 Channel Receiver 433 MHz

Centurion Nova - 4 Channel Receiver 433 MHz

Nova - 4 Channel Receiver (433MHz)

Part No:SW46-4-1

Smart - 1 Channel Receiver 433 MHz

Centurion Smart - 1 Channel Receiver 433 MHz

Smart - 1 Channel Receiver (433MHz)

Part No:SW45

CENTINEL 3 / 4.5 / 6m Stainless Steel - No Pole/No Spring - Coastal

Centurion Traffic Barrier CENTINEL 3/4.5/6m S/Steel No Pole/ No Spring

Housing epoxy coated grade 3CR12 stainless steel Internal spring counterbalance Attractive slim-line construction Convenient actuating handle for raising boom pole Thumbwheel to secure pole in raised or lowered position

Part No:GA81-5

Special Order

CENTINEL 3 / 4.5 / 6m Mild Steel excl Pole and Spring

Centurion Traffic Barrier CENTINEL3/4.5/6m MSteel (No Pole/ No Spring)

Housing epoxy coated mild steel Internal spring counterbalance Attractive slim-line construction Convenient actuating handle for raising boom pole Thumbwheel to secure pole in raised or lowered position

Part No:GA81-4

Special Order

Comb MKII Battery for Plus/Lite IC229-3

Comb MKII Battery for Plus/Lite IC229-3

Battery Back up battery for IC229-3

Part No:IC229-6

Special Order

DACE Receiver EXO-7

DACE Receiver EXO-7

Frequency: 403 & 433mHz Contacts: N/O or N/C relay output Voltage: 12-24V DC/AC Memory: 630 Remotes. Mode: Pulse or latch

Part No:SW142-1

Special Order

Gemini Rx 1 Channel Code Hopping 433Mhz

Gemini Rx 1 Channel Code Hopping 433Mhz

Gemini MTQ 433Mhz Code hopping receiver Single channel Support up to 30x programmable remotes 65x120x30 mm

Part No:SW21

ET 3 Channel Rolling Code Receiver Condo 434mHz

Nice 3Ch Rolling Code Receiver Condo 434mHz

Compatible with both ET BLU MIX and ET BLUE ? rolling code formats 999 user memory locations. Each user can be configured to use all thre Individual memory location erasing without the need to have the transm 3 digit, 7 segment LED display for ease of setup and user memory locat Each channel can be individually setup to either latch, momentary on o Channel pulse length can be setup to any time between 1 and 254 second'

Part No:SW42