Categories

Showing 1-12 of 60 item(s)

Accentronix Fixed Micro Receiver

Accentronix Fixed Micro Receiver

Power: 5-30VDC 40mA Unit is used to link Accentronix Nano/ Nano Plus to the Nice wireless keypad (LK12-3) Unit can also be used on the Infiity Cell Switch same as the with Nano & Nano Plus devices. Compact design. 40mm x 34mm x 19mm 1x FET outputs total 400mA

Part No:SW43-9

Centurion Barrier Fence SECN 1.5m Excl Mounting Kit V1

Centurion Barrier Fence Module SECN 1.5m Excluding Mounting Kit V1

Security Fencing for Sector II Boom Modular sections length: 1500mm pre-assembled Vertical length below barrier pole: 692mm. Fence members: 19 aluminium round tube Mass: 1.3kg/m (1.5m module 2kg). Aluminium flatbar section: 25mm x 5mm. Rivets used to fit the aluminium flatbar: 5mm. It s advisable to lubricate the moving parts of the linkage assembly Vertical members: six per 1.5m length @ 250mm spacing.

Part No:GA126-1

Special Order

Centurion TRAPEX Mounting Kit V2 SS Type

Centurion Barriers Trapex Mounting Kit V2 Stainless Steel Type

Trapex Mounting Bracket Fits on Round or Rectangular Poles

Part No:GA126

Nova - 1 Channel Receiver 433 MHz

Centurion Nova - 1 Channel Receiver 433 MHz

Nova - 1 Channel Receiver (433MHz)

Part No:SW46-2

Nova - 2 Channel Receiver 433 MHz

Centurion Nova - 2 Channel Receiver 433 MHz

Nova - 2 Channel Receiver (433MHz)

Part No:SW46-3

Nova - 4 Channel Receiver 433 MHz

Centurion Nova - 4 Channel Receiver 433 MHz

Nova - 4 Channel Receiver (433MHz)

Part No:SW46-4-1

Centurion Traffic Barrier SECTOR II Jack Knife Assembly Incl Rod

Centurion Traffic Barrier SECTOR II Jack Knife Assembly Incl Rod

SECTOR II Jack Knife Assembly Includes Rod

Part No:GA80-1

Special Order

Centurion Traffic Barrier SECTOR II Rectangular Pole Jack Knife Kit

Centurion Traffic Barrier SECTOR II Rectangular Pole Jack Knife Kit

Jack Knife Kit for Rectangular Pole Retrofit to SECTOR II Incl. Sector 2 LED Coil Strips 10mm x 5 7m Size: L 6000mm H 85mm W 50mm Pole wall thickness 1 5mm (excl. bumper) Powder Coated

Part No:GA80-1-1

Special Order

Comb MKII Battery for Plus/Lite IC229-3

Comb MKII Battery for Plus/Lite IC229-3

Battery Back up battery for IC229-3

Part No:IC229-6

Special Order

DACE Receiver EXO-7

DACE Receiver EXO-7

Frequency: 403 & 433mHz Contacts: N/O or N/C relay output Voltage: 12-24V DC/AC Memory: 630 Remotes. Mode: Pulse or latch

Part No:SW142-1

Special Order

Gemini Rx 1 Channel Code Hopping 433Mhz

Gemini Rx 1 Channel Code Hopping 433Mhz

Gemini MTQ 433Mhz Code hopping receiver Single channel Support up to 30x programmable remotes 65x120x30 mm

Part No:SW21

ET 3 Channel Rolling Code Receiver Condo 434mHz

Nice 3Ch Rolling Code Receiver Condo 434mHz

Compatible with both ET BLU MIX and ET BLUE rolling code formats 999 user memory locations. Each user can be configured to use all thre Individual memory location erasing without the need to have the transm 3 digit 7 segment LED display for ease of setup and user memory locat Each channel can be individually setup to either latch momentary on o Channel pulse length can be setup to any time between 1 and 254 second'

Part No:SW42